Rubber Gasket Cutting Machine Foam Label Die Cutting Machine
max unwinding width:
die cutting area:
Max die cutting pressure:
40T can adjustable
3 shaft unwind
photocell eye for mark search
cutting to piece
Packaging & Delivery
wooden case packing,Rubber Gasket Cutting Machine Foam Label Die Cutting Machine
Rubber Gasket Cutting Machine Foam Label Die Cutting Machine (Customize Die Cutting Machine)
1.The die cutting machine can be equipped with multi-layer bonding function of the feeder,electric eye,slices,die-cutting,waste collection,rewinding,washed etc combine into fully automatic die cutting machine.
2.Machine full computer control,operation fully automated,simple,convenient,safe and high precision.
3.Each workers cann manage four devices at the same time,from the feeding die cutting waste to the cutting or rewinding all fully automated.save manpower,improve work efficiency.
5.LED intelligent operation of the display,with all intelligent touch screen operation,damage parts can be displayed on the screen,save maintenance of the manpower and resources.
6.Improve material utilization,saving material 30%~50% or more than traditional machine.
7.The largest cutting area of up to 800*800mm.
8.The use of die cutting machine secondary molding positioning device structure to conpensate for the cumulative error of the servo motor.
9.Adopts photoelectric control,so that the material in a relaxed state between the machines to reduce the tension deformation of non-metallic materials,and ensure the high speed feed.
10.Active mold with double guide column positioning,to improve the smooth movement of the mold base up and down.
11.Automatic tension control of the feeding and winding shaft.reduction of deformation due to stretching of the material.
12.Standard process,automatic feeding--die cutting--rows of grinding--cutting(or rewinding)
13.Standard configuration:a feeding machine,a slicer,die cutting a board,safety grating device.
1.This machine is suitable for multi-layer unwinding,it with function of multi-layer lamination,partial bonding function,die cutting,waste rewind,knock out,cutting to piece and rewinding all function and all of these are controlled by the PLC at touch screen
2.It used for die cutting PET,PVC,Mylar,Foam,Paper etc kiss cutting
Main Technical Parameters:
Strokes per minute No.
I , unwinding part ---------------max width 450mm 1, First unwind : 3 inch air-shaft , AC Motor , frequency control second unwind ,3 inch air-shaft , magnetic powder brake 2, unwinding effective width : 400mm , max diameter is 24 inch ( 609mm), bear weight at 136KG 3, touch dancer sensor for first guiding roller 4, Servo motor control the 2 pulling roller , pulling roller is rubber material and hardness must at 75--80 degree , opening height is adjustable at least 24mm II , Main Machine ------------ Die cutting area 450*400mm 1, Four shaft hydraulic machine 2, max cutting force : 40 Ton 3, shock proof 4, with light for the die cutting part so that easy installing mould and watch the die cutting part 5, plane die cutting area 450mm length , 450mm width 6, Safety Light Curtains at four corner . III, electronic PLC control 1, LCD touch screen , computer control base 2, with password for data protection 3, can save the datas that setted 4, low maintainance 5, all the parts are under CE safety standard , electronic parts have CE mark 6, all the cutting / unwinding length and number are can set in the touch screen 7, cutting depth precision control at 0.025mm 8, stroke is controlled in 50--101.6mm IV ,die cutting mould installing with clamp tool and locking tool so that can put mould in directly and then locked , change mould in few time V, mould plate package 1,with up and down cutting boards 2, stainless steel material mould plate , polished , easy control the cutting depth , can cutting both kiss cut and through cut 3, one piece PET or PVC sample for mould protective 4, Raiser ( tool to put conveyor belt ) for through die cutting . Conveyor belt part at main machine only. VI, scrap/ waste Rewinding PAGE 3 1, three inch airshaft rewinding width AC motor control 2, max rewinding diameter is 609mm, 3, bearing weight at 22KGS 4, effective width 400mm 5, with dancer for the tension control VII , knock down part for the holes 1, the punching area at least 400mmX400mm 2, Pneumatic control , and stroke at least 2 inch 3, Safety Light Curtains at four corner 4, not include the punching mould VIII , Rewinder 1, with max roll diameter 609mm 2, Rewinding shaft is 3 inch airshaft 3, AC motor , speed can increase or descrease , with switch if forward/ reverse 4, effective width is 400mm , 5, max bearing weight is 136KGS 6, Electromagnetic clutch tension control NINE , CUTTER 1, effective width 400mm, 2, motor control the cutter operation 3 , can move forward / backword to suit for the unwinding length per time TEN , slitter 1, 2 shaver type slitter installed on the knock down part table before sheeting and rewinding